Heavy Vehicle Limits, B-Doubles and Road Trains
Australia allows long multi-trailer combinations such as B-doubles and road trains, but only on approved networks and under conditions. This page explains combinations such as B-doubles and road trains, mass and dimension limits, and what a fleet register can keep track of.
Mass and dimension limits
The HVNL sets general mass and dimension limits, and those limits differ by vehicle type and by the access a route allows. Operators commonly refer to general mass limits and higher mass limits, with the higher limits requiring accreditation and approved routes. General mass limits were raised under the amended law that began on 1 August 2026, so older figures may be out of date.
Always read the current NHVR guidance and any notices for your configuration, because limits and conditions are updated by notices and can differ by state or road.
B-doubles and road trains
A B-double is a prime mover towing two linked semi-trailers and is common on main interstate corridors. Road trains tow additional trailers and are restricted mainly to remote and rural networks, particularly in Queensland, the Northern Territory, South Australia and Western Australia, with some access in New South Wales and Victoria.
Which vehicles may use which roads is set by road managers and notices. A configuration that is allowed on one highway may not be allowed on the connecting regional road.
- B-doubles: main freight corridors and approved networks
- Road trains: outback and remote networks
- Standard semi-trailers: wide general access
Performance Based Standards
The Performance Based Standards (PBS) scheme lets vehicles that meet defined safety performance measures operate outside prescriptive limits, with access set by network levels. It is administered nationally by the NHVR.
PBS vehicles carry their own approval documents and conditions. Keeping the approval details against the vehicle record helps drivers and dispatchers know what each unit is allowed to do.
Inspections, maintenance and records
Heavy vehicles are subject to registration, roadworthiness requirements and roadside inspection by state enforcement officers. Operators in an accreditation maintenance program must also keep maintenance records.
In 4transports you can keep each vehicle's details, entered maintenance work, service dates and costs, then assign vehicles to orders manually. It does not read odometers, telematics or mass data from the truck, and it does not decide which vehicle is legal for a route.
Frequently asked questions
What is the difference between a B-double and a road train?
A B-double tows two linked semi-trailers and is not classed as a road train. Road trains tow more trailers and run on narrower sets of approved remote routes.
Does 4transports check mass limits?
No. You enter vehicle and load details yourself, and compliance with limits stays your responsibility.
Plan orders, vehicles, drivers and CMR records in one place. See the plans.
See plans